Luperal Silentium 100 is a 100 mm double-glazed acoustic office partition system tested to Rw 52 dB under ISO 10140-2 and ISO 717-1, with BS 5234-2 Severe Duty structural performance for GCC commercial interiors.
The Silentium 100 is a double-glazed acoustic office partition and acoustic glass partition system, tested to Rw 52 dB under ISO 10140-2 and rated to ISO 717-1:2020, with BS 5234-2 Severe Duty structural performance. Its 100 mm double-glazed construction is engineered for meeting rooms, boardrooms, executive offices, and corporate interiors across the GCC — Qatar, Saudi Arabia, the UAE, Kuwait, Bahrain, and Oman — where confidential speech privacy is a specification requirement.
Yes. The Silentium 100 is a double-glazed acoustic office partition — a full-height acoustic glass partition system tested to Rw 52 dB (ISO 10140-2, rated to ISO 717-1:2020) with a 100 mm construction depth, designed for meeting rooms, boardrooms, and executive offices.
Rw 52 dB is a high, specification-grade level of airborne sound insulation measured on the complete Silentium 100 assembly. In a typical office, raised conversation on one side becomes near-inaudible on the other — the level required for confidential meeting rooms and executive interiors.
The Silentium 100 has a 100 mm construction depth with a 40 mm face width, using twin extruded aluminium profiles with a decoupled air gap between two laminated glass panes.
A standard single-glazed partition uses one pane and gives moderate reduction. The Silentium 100 uses two independent laminated panes separated by a decoupled air gap, with continuous gaskets and flanking control, allowing the tested Rw 52 dB that single-glazed systems cannot reach.
Yes. The Silentium 100 is specified and installed across the GCC — Qatar, Saudi Arabia, the UAE, Kuwait, Bahrain, and Oman — led from Luperal's Doha base with regional fabrication and installation support.
Acoustic performance is measured to ISO 10140-2 and rated to ISO 717-1:2020, tested at the DAkkS-accredited GiB mbH laboratory (D-PL-18520-01-00). Structural robustness is positioned to BS 5234-2 Severe Duty.